Hi dear mini-fellows:) Someone asked me in comments to show how I made flats for the girl's room scene. I suppose it can be done much easier and I would love to learn other ways to make shoes in 1/12 scale or less, but here's what I came up with. I've tried to make this tutorial as detailed as possible because sometimes what you think is simple is actually not so easy to understand. Well, let me start. Here's what you need: cloth (I use patchwork fabric, because it has neat print and is pretty thick), glue PVA - the white thick glue in the cream-bottle. what's the analog in your countries? is tacky glue the same? it is glue suitable for paper and cardboard mostly. It takes some time to dry but once it does it makes paper or fabric much harder, translucent crystall glue for different materials. UHU has the same for woodwork and other staff. you need to apply glue on both sides, wait couple of minutes and press them hard together - they are instantly glued with very high adhesion, thread for finishing touches, thin paper and cardboard (I use any thin cardboard from small boxes, like boxes from medicines, cosmetics etc.)
1. I draw the base of the shoes and the heels on a thin box cardboard (as you see, it's the lead from the used box)
2. put them together and glue with PVA glue - it's perfect for cardboard
3. Here are patterns for inner side (insoles) and tips of the shoes on a simple thin paper (like the one you print staff in the office)
4. make sure it suits as you wish it to. cut it to size if needed
5. cut two thinnest lines for back side of flats from simple paper
Yes, they are thin and small :)
6. I glue them to the left side of the fabric with PVA glue. As I said, it'll be much harder once dried and the glue prevents the fabric from ruining.
7. while glue dries, paint the soles
8. cut the patterns from fabric. The soles shall be cut to size, while the tips and the backs need more fabric to cover the edges.
9. The backs shall be covered both sides with fabric
10. here are finished back sides and an example of folding the tips. I glue fabric to tips with crystal glue because it's very hard and messy to try to glue them with not-an-instant glue.
All the parts ready to assemble.
11. the insoles are glued to the base
12. I glue one side first, wait for it to dry and only then glue the other - this way it's much easier to keep them in place where needed
13. Tips are glued. It's time for backs.
time to cover all the small wholes and threads that accidentally came out.
I dip the thread into PVA glue, remove the glue excesses with a paper towel or simply with fingers. This way the thread will stick to the shoe and preserve the form when dried. I didn't make photos of wrapping the shoe - actually its up to you :)
I hope it was useful for anyone out there :) Cheers!
2nd floor flooring with railings. These railings I am very proud of, because I couldn't figure out for a long time how to do them. I've tried glueing wire, paper, cut matches - but it was all clumsy and very hard to manage. At last I've tried the same method I used to cover shoes with threads. I took brown muline - it's a thick thread used for cross-stitch and embroidery, dipped it in PVA glue. Once it dried it became stiff. I cut it in pieces and glued easily. It looks lite wooden columns!
I've painted the stairs and applied a little shelf to the side. On the shelf you can see small pot with the flower. My only concern is that it won't actually be seen once the roof, walls and ceilings are added :)
And I have also painted the other side of the 2nd floor flooring to make a ceiling of the first floor with a tiny chandelier. But for some reason that particular photo doesn't want to load so I'll show it next time :)
